
- ZHONGYI
- Hunan, China
- within 30 days against the payment in advance
- 20 Set/Sets per Month
CBD Oil centrifuge
Made from stainless steel
Explosion proof
Electric control
Resistant to temp -100 c to 200 c
Equipped with jacket
Speed 0-1500 rm
Power rating 220v/ 280v or customized
Electric elements with UL
CBD Oil Centrifuge
Manually vertical plate top discharge centrifuge is kind of new improved and manufactured pharmaceutical equipment according to the national GMP requirements. It is also a top discharging and intermittent operation centrifugal filtration equipment with standard design and high-performance It is suitable for the solid and liquid separation and the suspension is available with high loosen solid , moderate particle size, need washed and low viscosity of liquid.It is not only suitable for the separation of many kinds of materials in small batch, but also suitable for mass production. It is widely used in medicine, chemical industry, light industry, food, national defense and other industrial fields.
1).Specific Data of Equipment
Model | PS600N | PS800N | PS1000N | PS1250N | PS1500N | ||||
Basket
| Diameter | 600 | 800 | 1000 | 1250 | 1500 | |||
Height | 310 | 380 | 425 | 500 | 705 | ||||
Volume L | 45 | 81 | 146L | 316L | 550 | ||||
G.force | 917 | 1008 | 806 | 700 | 538 | ||||
Speed rpm | 1500 | 1200 | 1000 | 900 | 850 | ||||
Thickness mm | 5 | 8 | 10 | 12 | 14 | ||||
Load for dry hemp each batch | 10 | 25 | 45 | 90 | 120 | ||||
Motor
| Power kw | 4 | 7.5 | 11 | 18.5 | 22 | |||
Voltage | 3Phase 220V 60HZ or customized CSA certificate | ||||||||
Protection Class | IP 55 | ||||||||
Insulation Class | F | ||||||||
Resistant to temp | - 50C to - 60 C | ||||||||
MOC | Stainless steel (SS 316L ) and Polish treatment SS304 is available | ||||||||
Dimensions (L*W*H)mm | 1450*1100*1150 | 1640*1100*1150 | 2120*1490*950 | 2230*1600*1140 | 2800*2275*1265 | ||||
Discharge | Top Manual Batch Discharge | ||||||||
Transmission | V-belt | ||||||||
Speed Control | Variable frequency | ||||||||
Brake | Electric | ||||||||
Usage | Solid liquid separation | ||||||||
Net weight kg | 1200 | 1875 | 2175 | 3246 | 4200 | ||||
Lifting weight when repair kg | 1000 | 1500 | 2000 | 2000 | 3000 | ||||
Condition | Brand New | ||||||||
Standard | GMP |
2 Structure of Centrifuge
◆ Lid
It's made all by stainless steel (SS 316L),There are equipped with feed pipe, wash pipe, explosion proof glass lamp and sight glass .The lid and casing are equipped with a flange and a quick opening structure, and the lid is sealed with the silicone hollow seal. The opening is flexible and reliable.And the mounting interface of washing pipe, observation mirror and other additional devices are equipped with the silicone cushion.
◆Basket
It is made all by stainless steel (SS 316L),After the welding, the dynamic balance examination of basket should be necessary , the dynamic balance precision is with grade G6.3, and the total weight should not exceed 1/400 of the total weight of the basket.and the diameter run-out is less than 0.002D( D means the diameter of the basket ).
Bearing pedestal is made by carbon steel and lined stainless steel (SUS 304) with thickness 3 mm .
◆ Chassis
The chassis is plate structure, the material is carbon steel Q235 A, and the thickness of the plate is not less than 50mm, the surface is lined stainless steel (SUS 304)with thickness 3mm. The operating position is anti-slide stainless steel (SUS 304) , and the liquid outlet is stainless steel(SS316L).
◆Drive Motor
The motor adopts YB3 high-efficiency energy-saving anti-explosion motor, equipped with stainless steel (SUS 304) protective cover, where there are heat dissipation window, incoming rubber cover and wiring door.
◆Isolation Damper
The lower part of the platform is equipped with German liquid isolation damper ,and no vibration interference to the foundation ground and peripheral equipment. Each machine is equipped with anti-sliding pad and leveling steel plate too.
◆Electric Device
a .The electrical control part of the equipment is equipped with a special electrical control cabinet and adopts control components from famous brand CHNT .There are control unit, stepless speed regulation, electrical regenerative braking in the inverter with main motor overload, short circuit, overcurrent protection functions. The electric control cabinet is equipped with ammeter, voltmeter and operation button, etc. The electric control cabinet is centrally located in the power distribution room.
b The centrifuge is controlled by two control cabinet in two different places, and the explosion proof button cabinet is closed machine on site.
c Equipped with motor overheat and overload protection
◆Itemized list of Equipment
NO. | Name | Qty | Manufacturer |
1 | Centrifuge machine | 1 | Xiangtan Centrifuge |
2 | Drive motor | 1 | Wannan Manufacturer |
3 | Main control cabinet | 1 | Xiangtan Centrifuge |
4 | Nitrogen protection system | 1 | AirTAC |
5 | Isolation damper | 4 | Gerb |
6 | Electric control system | 1 | CHNT |
7 | Lamp | 1 | EEW |
8 | Frequency Converter | 1 | INVT |
5)Tools
Code | Name |
PS-G-1 | Socket wrench |
PS--G-2 | Extension handle |
6) Scope supply of manufacturer
NO. | Name | Qty ( set) |
1 | Centrifuge | |
2 | Tools | |
3 | Filter bags | 1 |
4 | V-belt | 1 |
Documents | ||
1 | User manual of centrifuge | 1 |
2 | Certificate of centrifuge | 1 |
3 | Test report of centrifuge | 1 |
4 | Packing list | 1 |
NO. | Name | Qty ( set) |
1 | Centrifuge | |
2 | Tools | |
3 | Filter bags | 1 |
4 | V-belt | 1 |
Guarantee
◆The manufacturer guarantees that the equipment provided is brand new, advanced mature, complete and safe and reliable.
◆According to the customer's requirements,in line with the national product technical requirements and manufacturing process standards.
◆The equipment should be tested according to the standard before delivery.
◆The guaranty of machine preformance is 1 years (Equipment delivered by us will be guaranteed from the date of start up for 1 years .The damage caused by negligence or improper operation and maintenance or characteristics of corrosion will not cover by guarantee. The guarantee will cease if the client make modification s in work conditions and /or plant without manufacturer written authorisation).
◆Any transportation cost that occur for the parts repair or replacement should be afforded by the Buyer.
◆If any problems caused for quality during the warranty period, the Seller should repair or replace the broken parts for free, if the problem caused from the client’s side, the Seller will help supply the spare part at lowest cost.